Home   |   Newsletter   |   Print Page   |   Contact Us   |   Sign In   |   Join Now
Blog Home All Blogs
Search all posts for:   


View all (60) posts »

FXLC95000CL Xtrinsic Intelligent Motion-sensing Platform - More than just a Smart Sensor

Posted By Administration, Friday, November 14, 2014

The following guest blog post, written by Freescale's Michael E Stanley, originally appeared in The Embedded Beat on May 28, 2013.


FXLC95000CL Xtrinsic intelligent motion-sensing platform - More than just a smart sensor

Almost three years ago, I introduced you to the MMA955x intelligent 3-axis accelerometer (Evolving Intelligence with Sensors, June 2010).  Several weeks ago, Freescale announced the next product in that line, the FXLC95000CL Xtrinsic intelligent motion-sensing platform (henceforth referred to as the “95K”).  More than just a smart sensor, we’ve beefed up the design in a number of ways.  That is most obvious in the device’s 3x5x1 LGA package. This is a bit larger than that of its older sibling (at 3x3x1).  But you’ll see we need that extra space for extra GPIO, master SPI port and 8X the flash and RAM content.


Contrasting the two devices you get:





32-bit ColdFire V1 with hardware multiply-accumulate

32-bit ColdFire V1 with hardware multiply-accumulate

Maximum CPU clock



Flash memory

16K bytes

128K bytes


2K bytes

16K bytes


4K bytes

16K bytes

slave ports

I2C / SPI (2 Mbit/s max)

I2C / SPI (4 Mbit/s max)

master port(s)

I2C (400 Kbit/s max)

I2C (400 Kbit/s max)

SPI (4 Mbit/s max)


1.8V1.8V core,1.72 to 3.6V I/O





frame interval

programmable delay block

2 general purpose TPMs

1 modulo timer

frame interval

programmable delay block

2 general purpose TPMs

1 modulo timer


Light-weight Scheduler





If you compare the 95K block diagram (below) with that of the MMA955x, you’ll see a LOT of similarities.  It’s basically the same design, just WITH MORE.




If you attach a MAG3110 magnetometer to the master I2C port and drop in Freescale’s free eCompass software, you’ll have everything you need for an electronic compass.

The development board for the 95K is shown below.  The master I2C is brought out on connector J8.  The master SPI is brought out on J12.  The board includes a dedicated MCF51QE128CLH which acts as a bridge between your PC’s USB port and the slave port of the 95K.


A26538_KITFXCL95000_trio3_LRWhen it was introduced three years ago, the MMA955x was the first of its kind. There were no other products like it. We designed that device for drop-in compatibility with the standard 3x3 accelerometer packages of the time. That constrained memory to 16K bytes flash, which is fine for numerous applications, but limiting for others.  The 95K blows the lid off those constraints by increasing the amount of flash and RAM by 8X, and doubling the clock speed of the MMA955x.  I am really looking forward to seeing what kind of creative products get built using the 95K.


You will find 95K details at the Freescale FXLC95000CL product page.  Development board details are available at KITFXL95000EVM product page.

This post has not been tagged.

Share |
Permalink | Comments (0)
Membership Software Powered by YourMembership  ::  Legal